To identify your MacBook Pro model, use the information in How to identify MacBook Pro models.
Once you're sure which model you have, find it in the list below to go to the instructions for that model. Note: Apple notebooks not listed in this table have non-removable memory.
13-inch | Macbook pro 2013 mac os mojave. MacBook Pro (13-inch, Mid 2012) MacBook Pro (13-inch, Late 2011) MacBook Pro (13-inch, Early 2011) MacBook Pro (13-inch, Mid 2010) MacBook Pro (13-inch, Mid 2009) |
15-inch | MacBook Pro (15-inch, Mid 2012) MacBook Pro (15-inch, Late 2011) MacBook Pro (15-inch, Early 2011) MacBook Pro (15-inch, Mid 2010) MacBook Pro (15-inch, 2.53GHz, Mid 2009) MacBook Pro (15-inch, Mid 2009) MacBook Pro (15-inch, Late 2008) MacBook Pro (15-inch, Early 2008) and earlier |
17-inch | MacBook Pro (17-inch, Late 2011) MacBook Pro (17-inch, Early 2011) MacBook Pro (17-inch, Mid 2010) MacBook Pro (17-inch, Mid 2009) MacBook Pro (17-inch, Early 2009) MacBook Pro (17-inch, Late 2008) and earlier |
- Mac Mini (Mid-2010/Aluminum Unibody) Mac Mini 2.4GHz Intel Core 2 Duo (MC270LL/A) Mac Mini 2.66GHz Intel Core 2 Duo; Mac Mini (Mac OS X Server, Late 2009) Mac Mini 2.53GHz Intel Core 2 Duo (MC408LL/A) Mac Mini (Late 2009) Mac Mini 2.26GHz Intel Core 2 Duo (MC238LL/A) Mac Mini 2.53GHz Intel Core 2 Duo (MC239LL/A) Mac Mini (Early 2009).
- Because of Apple-imposed limitations, the iPhone can't currently function as a true thumb drive. Memory Stick approximates something pretty similar, but not without some frustrating flaws.
Where is the model name located on my product. All Downloads Manuals Questions & Answers. Download the latest.
Applicable Models
The instructions provided below are for the following MacBook Pro (13-inch) models:
- MacBook Pro (13-inch, Mid 2012)
- MacBook Pro (13-inch, Late 2011)
- MacBook Pro (13-inch, Early 2011)
- MacBook Pro (13-inch, Mid 2010)
- MacBook Pro (13-inch, Mid 2009)
Memory specifications
Use the tables below to confirm the memory you're installing is compatible with your MacBook Pro.
MacBook Pro (13-inch, mid 2012) | |
Number of memory slots | 2 |
Base memory | 4 GB |
Maximum memory | 8 GB |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format - 67.6mm x 30mm (1.18 inch) - 2 GB or 4 GB - 204-pin - PC3-12800 DDR3 1600 MHz type RAM |
Additional notes | For best performance, fill both memory slots, installing an equal memory module in each slot. |
MacBook Pro (13-inch, Late 2011) and MacBook Pro (13-inch, Early 2011) | |
Number of memory slots | 2 |
Base memory | 4 GB |
Maximum memory | 8 GB |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format - 67.6mm x 30mm (1.18 inch) - 2 GB or 4 GB - 204-pin - PC3-10600 DDR3 1333 MHz type RAM |
Additional notes | For best performance, fill both memory slots, installing an equal memory module in each slot. |
MacBook Pro (13-inch, Mid 2010) and MacBook Pro (13-inch, Mid 2009) | |
Number of memory slots | 2 |
Base memory | 4 GB |
Maximum memory | 8 GB |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format -30mm (1.18 inch) - 2 GB or 4 GB - 204-pin - PC3-8500 DDR3 1066 MHz type RAM |
Additional notes | For best performance, fill both memory slots, installing an equal memory module in each slot. |
Removing or installing memory
Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.
Step 1: Remove the bottom case
- Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
- Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
- Touch a metal surface inside the computer to discharge any static electricity from your body.
Step 2: Remove existing memory (if present)
- Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don’t, try pressing the levers outward again.
- Hold the memory module by its notches and remove it from the slot.
- Remove the other memory module.
Important: Hold the memory modules by their edges, and do not touch the gold connectors.
Step 3: Install memory
- Align the notch on the gold edge of the module with the notch in the lower memory slot.
- Tilt the card and push the memory into the slot.
- Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
- Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.
Note: Make sure you install the memory according to this illustration, with the gold contacts inserted almost completely into the connector.
Step 4: Replace the bottom case
Replace the bottom case. Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.
Applicable Models
The instructions provided below are for the following MacBook Pro 15-inch models:
- MacBook Pro (15-inch, Mid 2012)
- MacBook Pro (15-inch, Late 2011)
- MacBook Pro (15-inch, Early 2011)
- MacBook Pro (15-inch, Mid 2010)
- MacBook Pro (15-inch, 2.53GHz Mid 2009)
- MacBook Pro (15-inch, Mid 2009)
Memory specifications
Please use the tables below to confirm the memory being installed is compatible with your MacBook Pro.
MacBook Pro (15-inch, Mid 2012) | |
Number of memory slots | 2 |
Base memory | 4 GB |
Maximum memory | 8 GB |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format - 30mm (1.18 inch) - 2 GB or 4 GB - 204-pin - PC3-12800 DDR3 1600 MHz type RAM |
Additional notes | For best performance, fill both memory slots, installing an equal memory module in each slot. |
MacBook Pro (15-inch, Late 2011) and MacBook Pro (15-inch, Early 2011) | |
Number of memory slots | 2 |
Base memory | 4 GB |
Maximum memory | 8 GB |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format - 30mm (1.18 inch) - 2 GB or 4 GB - 204-pin - PC3-10600 DDR3 1333 MHz type RAM |
Additional notes | For best performance, fill both memory slots, installing an equal memory module in each slot. |
MacBook Pro (15-inch, Mid 2010), MacBook Pro (15-inch, 2.53GHz Mid 2009), MacBook Pro (15-inch, Mid 2009) | |
Number of memory slots | 2 |
Base memory | 4 GB |
Maximum memory | 8 GB |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format - 30mm (1.18 inch) - 2 GB or 4 GB - 204-pin - PC3-8500 DDR3 1066 MHz type RAM |
Additional notes | For best performance, fill both memory slots, installing an equal memory module in each slot. |
Removing or installing memory
Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.
Step 1: Remove the bottom case
- Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
- Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
- Touch a metal surface inside the computer to discharge any static electricity from your body.
Step 2: Remove existing memory (if present)
- Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don’t, try pressing the levers outward again.
- Hold the memory module by its notches and remove it from the slot.
- Remove the other memory module.
Important: Hold the memory modules by their edges, and do not touch the gold connectors.
Step 3: Install memory
- Align the notch on the gold edge of the module with the notch in the lower memory slot.
- Tilt the card and push the memory into the slot.
- Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
- Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.Note: Make sure you install the memory according to this illustration, with the gold contacts inserted almost completely into the connector.
Step 4: Replace the bottom case
Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.
Applicable model
The instructions provided below are for the following MacBook Pro 15-inch models:
- MacBook Pro (15-inch, Late 2008)
Memory specifications
Please use the table below to confirm the memory being installed is compatible with your MacBook Pro.
MacBook Pro (15-inch, late 2008) | |
Number of memory slots | 2 |
Base memory | 2 GB |
Maximum memory | 4 GB |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format - 30mm (1.18 inch) - 1 GB or 2 GB - 204-pin - PC3-8500 DDR3 1066 MHz type RAM |
Additional notes | For best performance, fill both memory slots and install an identical memory module in each slot. |
Removing or installing memory
Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.
Step 1: Remove the access door
- Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, security lock, and any other cords connected to the MacBook Pro to prevent damaging the computer.
- Turn over your MacBook Pro and locate the latch. Push down to release the latch and remove the access door that covers the battery and hard drive.
- The latch must be in its released, open position to remove the access door.
Step 2: Remove the battery
With the latch still in its open position, gently pull up on the tab to remove the battery.
Step 3: Remove the bottom case
- Remove the eight screws that secure the bottom case of your MacBook Pro, and then remove the bottom case.
Important: Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. - Touch a metal surface inside the computer to discharge any static electricity from your body.
Step 4: Remove existing memory (if present)
- Push out the ejection levers on the sides of the memory module to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don’t, try pressing the ejection levers again.
- Hold the memory module by the notches and remove it from the slot.
- Remove the other memory module.
Important: Hold the memory modules by their edges; do not touch the gold connectors.
Step 5: Install memory
- Align the notch on the gold edge of the module with the notch in the lower memory slot.
- Tilt the card and push the memory into the slot.
- Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
- Repeat, if necessary, to install an additional memory module in the top slot. Press down on the module to make sure it is level.
Note: Make sure you install the memory according to the illustration below, with the gold contacts inserted almost completely into the connector.
Step 6: Replace the bottom case
Replace the bottom case. Replace and tighten the eight screws.
Step 7: Replace the battery
To replace the battery, make sure the latch is in its open position. Hold the battery at an angle and slide the lipped edge of the battery below the brackets on the outside edge of the battery bay. Gently press the battery down.
Step 8: Replace the access door
With the latch in the open position replace the access door, making sure it is level with the bottom case of your MacBook Pro, and press the latch into the closed position.
Applicable models
The instructions provided below are for the following MacBook Pro 17-inch models:
- MacBook Pro (17-inch, Late 2011)
- MacBook Pro (17-inch, Early 2011)
- MacBook Pro (17-inch, Mid 2010)
- MacBook Pro (17-inch, Mid 2009)
- MacBook Pro (17-inch, Early 2009)
Memory specifications
Use the tables below to confirm the memory being installed is compatible with your MacBook Pro.
MacBook Pro (17-inch, Late 2011) and MacBook Pro (17-inch, Early 2011) | |
Number of memory slots | 2 |
Base memory | 4 GB |
Maximum memory | 8 GB |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format - 67.6mm x 30mm (1.18 inch) - 2 GB or 4 GB - 204-pin - PC3-10600 DDR3 1333 MHz type RAM |
Additional notes | You can add two 4 GB memory modules for a maximum of 8 GB of memory. For best performance, fill both memory slots and install an identical memory module in each slot. |
MacBook Pro (17-inch, Mid 2010), MacBook Pro (17-inch, Mid 2009), and MacBook Pro (17-inch, Early 2009) | |
Number of memory slots | 2 |
Base memory | 4 GB |
Maximum memory | 8 GB |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format - 30mm (1.18 inch) - 2 GB or 4 GB - 204-pin - PC3-8500 DDR3 1066 MHz type RAM |
Additional notes | You can add two 4 GB memory modules for a maximum of 8 GB of memory. For best performance, fill both memory slots and install an identical memory module in each slot. |
Removing or installing memory
Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.
Step 1: Remove the bottom case
- Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
- Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
- Touch a metal surface inside the computer to discharge any static electricity from your body.
Step 2: Remove existing memory (if present)
- Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you can't find the notches, try pressing the levers outward again.
- Hold the memory module by its notches and remove it from the slot.
- Remove the other memory module.
Important: Hold the memory modules by their edges; do not touch the gold connectors.
Step 3: Install memory
- Align the notch on the gold edge of the module with the notch in the lower memory slot.
- Tilt the card and push the memory into the slot.
- Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
- Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.
Note: Make sure your memory is installed according to the illustration below, with the gold contacts inserted almost completely into the connector.
Step 4: Replace the bottom case
Replace the bottom case. Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.
Applicable models
The instructions provided below are for the following MacBook Pro 15-inch and 17-inch models:
- MacBook Pro (17-inch, Late 2008) and earlier
- MacBook Pro (15-inch, Early 2008) and earlier
Memory specifications
Please use the tables below to confirm the memory being installed is compatible with your MacBook Pro.
MacBook Pro (17-inch, Late 2008) and earlier and MacBook Pro (15-inch, Early 2008) and earlier | |
Number of memory slots | 2 |
Base memory | 512 MB (configure to order) |
Maximum memory | Refer to the table below |
Memory card specifications | - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format - 30mm (1.18 inch) - 200-pin - PC2-5300 DDR2 667 MHz Type RAM |
Refer to this table for the maximum amount of memory that can be recognized by these notebook computers:
2 GB | MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch, Glossy) |
3 GB | MacBook Pro (15-inch and 17-inch Core 2 Duo) Note: These models will support only 3 GB total memory. If you want to maximize the amount of SDRAM in your computer, install a 2 GB SO-DIMM in one slot and a 1GB SO-DIMM in the other. |
4 GB | MacBook Pro (15-inch 2.4/2.2 GHz), MacBook Pro (17-inch 2.4 GHz), MacBook Pro (15-inch Early 2008), MacBook Pro (17-inch Late 2008) |
Removing or installing memory
You will need to remove the battery before installing additional memory and reinstall the battery after installing the memory. The following procedure includes all the necessary instructions for both parts of the process.
Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.
Step 1: Remove the battery
- Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, and any other cords connected to the MacBook Pro to prevent damaging the computer.
- Turn the computer over.
- Locate the battery release latches on each side of the battery.
- Slide both latches up. The battery should pop up slightly.
- Lift the battery out.
Step 2: Remove the memory door
- Using a Phillips size 00 screwdriver, unscrew the memory door and remove it from the battery bay of your computer. Depending on the model of your MacBook Pro, you may have three or four screws.
- Touch a metal surface inside the computer to discharge any static electricity from your body.
Step 3: Remove existing memory (if present)
If you need to remove a memory card—for example if you are replacing it or if you need to get past the memory in the top slot to access the bottom slot—you can remove the card by spreading the tabs on each side of the card away from the notches in the memory card. The card should pop up slightly. Lift the memory card to about a 25-degree angle and then gently slide the card out of the memory slot.
Important: Hold the memory modules by their edges; do not touch the gold connectors.
Important: Hold the memory modules by their edges; do not touch the gold connectors.
Step 4: Install memory
- Insert the new memory card at a 25-degree angle. Line up the notch in the card with the small tab in the memory slot and slide the card into the slot until the gold edge is almost invisible. Firmly press the memory card into the memory slot. You might feel some resistance.
- Gently spread the small tabs in the memory slot away from the notches and push the memory card down until the two tabs on either side of the card lock into place.
- Insert any additional memory into the second slot.
Note: Make sure you install the memory according to the illustration below, with the gold contacts inserted almost completely into the connector.
Step 5: Replace the memory door
Replace the memory door, and make sure the door is lying flat before you screw it back into place.
Step 6: To insert the battery
- Place the bottom edge of the battery into the battery compartment at an angle, as shown below.
- Gently press the top edge of the battery down until the battery latch locks into place.
Learn more
Checking that your computer recognizes the new memory
Apple wireless keyboard trackpad tray. After installing additional memory, you should confirm that the computer recognizes the new memory. To check the computer’s memory:
- Start up your computer.
- When you see the Mac OS X desktop, choose the Apple () menu from the upper-left menu bar, then choose About This Mac.
The total memory includes the amount of memory that originally came with the computer plus the new memory you added, or if all the memory has been replaced, the new total for that memory. For detailed information about the amount of memory installed in your computer, open System Profiler by choosing Apple () and then About This Mac. Then, click More Info and then Memory from the Hardware section that appears in System Profiler.
If your computer doesn’t recognize the memory or doesn’t start up correctly, confirm that the memory you installed is compatible with your MacBook Pro and that it is installed correctly by reseating the memory.
As our devices have advanced, so has our storage devices. They are no more just a tool to store and transfer files. Revit software for mac. You can backup your iPhone to a flash drive, access files directly, encrypt them for security, and even shoot photos or videos straight on the drive. Keeping in mind how valuable your data is to you, we have curated an impressive list with the best flash drives for iPhone. Check them out now!
1. SanDisk iXpand Flash Drive for iPhone – Editor’s Choice
SanDisk is a renowned name in the storage world even before the iPhone came into existence. It still maintains the utmost spot with reliable, durable, secure, & intelligent products.
The lightning memory stick sports a flexible connector compatible with most iPhone cases. Furthermore, a handy iOS app enables automatic backup, direct shoot & save for videos and photos, and direct music or video playback.
Pros
- High-Speed transfer with USB 3.0
- Direct Shoot feature
- Available in Loop & Swivel Style
Cons
- The iOS app isn’t that great
Price: $33.49
2. iDiskk iPhone Memory Stick
The MFI certified flash drive is a media hub with an extensive and versatile list of file-format support. From .doc, .jpeg, .m4a, .avi, .mp3, to .wav; every format is welcomed open-heartedly.
And whether attached to iPhone or laptop, you can play uninterrupted music or movies directly from the drive. Besides, you can also add a biometric password to prevent your data from being misused or stolen.
Pros
- Password protected
- Fast read/write speed
- Wide compatibility
Cons
- Old-school design
Price: $39.18
3. HooToo MFi Certified Flash Drive
Boasting a sturdy yet lightweight aluminum body, HooToo flash drive for iPhone is relatively compact & easy to carry. Most importantly, it offers 80 MB/s reading and 30 MB/s writing speed, enabling fast & safe transmission.
Thanks to secure data encryption technology, your private files will have to be decrypted before being visible on PC. As for your iOS device, you can lock them with Touch ID & Password.
Pros
- The iPlugmate app support multiple formats
- Secure and fast data transfer
Cons
- Auto-backup does not run smoothly
Price: $39.99
4. iKlips C USB-C and iPhone Lightning Flash Drive
Specially designed to make data storage and transmission easier, the ADAM elements iKlips C [World’s first Apple MFi certified] sports lightning and USB C connectors. Apart from being fast & secure, it is the iOS app that impressed me most.
It manifolds the flash drive’s functionality, to media viewing, Apple Music, and iTunes integration, password protection, Apple AirPlay, and more. It can even instantly backup your Instagram, Facebook, and Evernote accounts.
If you are interested, check out the in-depth review of the flash drive.
Pros
- Great iOS app
- Lightning to USB C
- “lost-proof” silicone cover
Cons
- Pretty Expensive
Price: $179.00
5. Kimiandy 3 in 1 USB Flash Drive
Whether iPhone, iPad, Mac, or an Android device, with Kimiandy, you won’t need an additional dongle for file transfer. As it sports a Lightning, USB, & micro USB port, and along with that comes a Type C adapter.
But doesn’t that increase the risk of a data breach? Well, to counter that, Kimiandy incorporates a fingerprints & password lock. So you can lock the full drive or lock specific files as per your convenience.
Pros
Apple Memory Stick
- Support multiple devices
- Plug & play
Cons
- Data transfer is a bit slow
- The app doesn’t have a friendly interface
Price: $21.99
6. HooToo iPhone Lightning Memory Stick
All the goodness of HooToo is now enhanced with one additional port. The 3-in-1 flash drive for iPhone is equipped with an MFi-Certified Lightning Port, USB-A Port, and USB-C Port. Notably, all ports are laden with the utmost technology to offer high-speed transfers.
The ante is also upped in terms of material employed; the zinc casing offers rugged and durable protection and better heat management. The U-Hub app supports auto-backup and direct shoot & save.
Pros
- 3-in-1 drive
- Zinc casing
- Supports multiple formats
Cons
- The connector isn’t rugged-case friendly
Price: $39.99
7. Sunany USB Flash Drive
This USB flash drive for iPhone has a 4-in-1 linker design convenient for data transfer between different platforms. It boasts 128 GB storage capacity, and you can experience up to 80 MB/s reading and 40 MB/s writing speed.
It’s ideal for quickly free up space on your phone and to carry your photos, videos, and other media with you. Further, it’s super lightweight and portable, which only adds to the convenience. You can choose from 4 color options and take advantage of dedicated customer support in case of any quality issues.
Pros
- Multi-port support
- One-Click Backup
- Directly share to social media
Cons
- Feels cheap & flimsy
- Instructions are not proper
Price: $22.99
8. EATOP USB Memory Stick Flash Drive
A handy plug & Play feature enables one-click backup of photos & videos from the camera roll. Further, the free Y-disk app supports all major video and music formats to stream directly without any hindrance.
Apart from videos and photos, you can backup and manage files efficiently and encrypt single files in the memory stick flash drive. With a 3-in-1 port design, it comfortably & efficiently supports multiple devices.
Pros
- Premium aluminum alloy body
- 2 Year Warranty
Cons
- Software support is a bit buggy
Price: $19.99
That’s all for now, folks!
Thanks to iOS’s strict privacy stand, not all flash drives work on iPhones. This is why it is essential to check compatibility and MFi certification before you buy a flash drive to back up your iPhone.
We have found the drives mentioned above a perfect match. If you have any more feedback or suggestions, do let us know in the comment section below. Meanwhile, here are some articles to aid you:
A self-professed Geek who loves to explore all things Apple. I thoroughly enjoy discovering new hacks, troubleshooting issues, and finding and reviewing the best products and apps currently available. My expertise also includes curating opinionated and honest editorials. If not this, you might find me surfing the web or listening to audiobooks.
Apple Memory Stick For Ipad
- https://www.igeeksblog.com/author/arshmeet/Why Hasn't Apple Adopted USB-C for iPhone? Brewing An Alternative..
- https://www.igeeksblog.com/author/arshmeet/A Decade of Apple: Happy, Sad, Great or Worst Moments of Tech Giant
- https://www.igeeksblog.com/author/arshmeet/Is Fining Apple for Secretly Slowing iPhones Justified or Not?
- https://www.igeeksblog.com/author/arshmeet/Why Is Samsung's Galaxy S10 Lite and Note 10 Lite a Brilliant Idea?